FANUC DXCE

Please register your new user name with half-width alphanumeric characters.

Terms of User for Digital Transformation Customer Engagement site

Established: September 16, 2020

This Terms of User for Digital Transformation Customer Engagement (“Terms”) create a contract between you and FANUC CORPORATION (“FANUC”). If you (“Customer”) desire to use Digital Transformation Customer Engagement site (“Website”), it is necessary to agree to these Terms.

Article 1 Use of Personal Information, etc.

FANUC shall treat Customer’s Personal Information, etc. in accordance with the following conditions.

  • (1) Definitions
    Personal Information:Personal information defined in the Act of the Protection of Personal Information (hereinafter referred to as the “Act”)
    Person-related information:Information relating to a living individual which shall be neither Pseudonymously Processed Information nor Anonymously Processed Information defined in the Act.
    Other Information:Any information provided by Customer through this Website other than Personal Information and Person-related information.
    Personal Information, etc.:Personal Information, Person-related information and Other Information.
  • (2) Treatment of Personal Information, etc.
    (i) FANUC shall teat Customer’s Personal Information in accordance with “「Privacy Policy” posted on this Website.
    (ii) The purposes of use of Customer’s Personal Information is as follows;
    - to implement questionnaire survey by e-mail, post, phone or other ways aiming to improve the services, etc. on this Website.
    - to provide Customers with the useful information regarding the products, services, etc. of FANUC, its subsidiaries, its affiliates or its partner companies by e-mail or other ways.
  • (3) Provision of Personal Information, etc. to third party
    The Customer agrees that FANUC may provide Customer’s Personal Information, etc. to subsidiaries and affiliates of FANUC within the scope of the purposes of use set forth above.
Article 2 Management of Customer ID

Customer shall not disclose, lend, or share a Customer ID or password ("Customer ID, etc.") with any third party, and shall properly manage such Customer ID, etc. FANUC shall assume no responsibility in the event the Customer or a third party incurs damages, losses, or harm due to the insufficient management, misuse, or unauthorized use by third parties of the User ID, etc.

Article 3 Prohibited Matters

The Customer shall not commit the following acts in using this Websites;

  • (1) Any acts violating laws or public order and morals;
  • (2) Any acts sending or using a harmful computer program such as computer viruses;
  • (3) Any acts infringing on the intellectual property rights, portrait rights, privacy, reputation or other rights and interests of FANUC or a third party;
  • (4) Any acts duplicating, distributing, publishing, etc. data, information, text, software, etc. obtained through this Website (Contents) beyond the scope of legally accepted exceptions;
  • (5) Any acts imposing an unreasonable or disproportionately large load on FANUC’s systems or networks, etc. and acts interfering with the operation or use of this Website.
  • (6) Any acts conducting reverse engineering and other analytical activities regarding the software and other systems provided by FANUC.
  • (7) Any acts collecting the information regarding the users of this Website.
  • (8) Any acts accessing this Website for the purpose of measuring the quality, performance or functions of this Website or developing benchmarks or competing products or services, or for the purpose of imitating or duplicating all or any part of this Website.
  • (9) Any acts violating laws, regulations or these Terms or acts interfering with the operation of the Service or being harmful to the FANUC.
  • (10) Any acts inducing or facilitating, directly or indirectly, of any acts specified in each of the preceding items.
  • (11) Any other acts that FANUC considers to be inappropriate.
Article 4 Ownership of Rights

All rights in and to the Contents are expressly reserved by FANUC or its licensors. In no event shall any rights in or to the Contents belonging to FANUC and its licensors, including but not limited to proprietary or intellectual property rights, be transferred or licensed to any Customer.

Article 5 No warranties/Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE CONTENTS SHALL BE PROVIDED ON AN “AS IS” AND “AS AVAILABLE” BASIS, AND FANUC DOES NOT MAKE ANY EXPRESS OR IMPLIED WARRANTY IN ANY WAY WHATSOEVER, INCLUDING ANY WARRANTY THAT THE CONTENTS WILL BE CONTINUOUSLY PROVIDED WITHOUT DEFECT, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-EXISTENCE OF INFRINGEMENT IN RESPECT OF THE CONTENTS, OR ANY WARRANTY THAT THE USE OF THE CONTENTS WILL CONFORM TO LAWS APPLICABLE TO THE CUSTOMER OR INTERNAL REGULATIONS OF INDUSTRIAL GROUPS.
CUSTOMER SHALL BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THIS WEBSITE, AND FANUC SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SUCH DAMAGES.

Article 6 Modification to These Terms

FANUC may modify the contents of these Terms at its own discretion. If FANUC revises these Terms, it shall notify the Customer of the details of such modification by reasonable means. Changes to these Terms shall be deemed to have been agreed upon using the Website after the modification.

Article 7 Breach of Terms

In the case where FANUC acknowledges that Customer is using or is likely to use this Website in breach of these Terms, FANUC may shall take such measures as FANUC deems necessary and appropriate, including suspending the provision of all or any part of the Contents through this Website.

Article 8 Governing Law

The Terms and Conditions shall be governed by, and construed in accordance with, Japanese law.

 

Plivacy Policy

FANUC CORPORATION recognize that it is our social responsibility to treat any personal information, which can be used to identify a specific individual, such as name, address and e-mail address ("Personal Data"), properly with utmost care. FANUC CORPORATION is committed to protecting and respecting Personal Data in line with the following:

  • 1.Strictly follow the Act on the Protection of Personal ("the Act") and all related laws, regulations and guidelines of any governmental authority.
  • 2.Implement a strict security control over Personal Data by group and division to properly manage Personal Data.
  • 3.Use Personal Data only for the purposes of executing a contract, offering better products and services, and providing useful information in our FA, robot and robomachine businesses. When we ask for your Personal Data for other purposes, we will let you know in each case of our purpose.
  • 4.Not provide any Personal Data to a third party without a prior consent, unless otherwise provided in the Act.
  • 5.Make reasonable efforts to promptly respond to a request for reference or correction of Personal. (Please contact the following for your requests and inquiries.)

Kenji Yamaguchi
President and CEO
FANUC CORPORATION

Handling of personal information on this site
  • ・The content you send from the mail form in this site is encrypted and protected by SSL (Secure Socket Layer) technology. Your personal information will be handled in accordance with FANUC's privacy policy and will not be used for any purpose other than answering your inquiries without your consent.
  • ・This site uses Google Analytics, which is a service of Google Inc., in order to understand the visit situation of customers on this site. Google collects, records and analyzes your visit history on this site based on the cookies that FANUC issues. FANUC will receive the analysis result from Google and understands your visit situation on this site. Your information collected, recorded and analyzed by Google Analytics does not contain any personal information that identifies a particular individual. In addition, such information is managed by Google based on its privacy policy.
Agree to the Terms of Service

Please set our domain name "@fanuc.co.jp" to receive e-mails from us if you have set spam filter.

Copyright © 2011-2020 FANUC CORPORATION